android on pc

Home / All posts

How to Root Galaxy S3 (AT&T) SGH-I747 on Android 4.3 Jelly Bean Firmware

Posted by Unknown Rabu, 12 Februari 2014 0 komentar

The AT&T version of Samsung Galaxy S3 (SGH-I747) has already received Android 4.3 Jelly Bean Over-The-Air (OTA) update with firmware build number I747UCUEMJB.

Samsung Galaxy S3 (AT&T) SGH-I747 users who have already updated their devices with Android 4.3 Jelly Bean, may root their devices using the tutorial below.

This tutorial uses CF-Auto-Root file released by Senior XDA-Developers, Chainfire. Head over to the CF-Auto-Root main thread to learn more about the root method.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Install USB Drivers for Samsung Galaxy S3 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. Ensure the battery of the phone is charged more than 80 percent.
5. The CF-Auto-Root file works only on the AT&T version of Galaxy S3 (SGH-I747). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S3 by navigating to Settings >> About Phone.

Files Required
1. CF-Auto-Root (Mirror Link) for Galaxy S3 (AT&T) SGH-I747 (CF-Auto-Root-d2att-d2uc-samsungsghi747.zip)
2. Odin 3.07 (Mirror Link)

Steps to Root Galaxy S3 (AT&T) SGH-I747 Running on Android 4.3 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.07 files using WinRAR/7-Zip/WinZip or any other extracting tool.
Step 2: Switch off the Galaxy S3. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer as an Administrator.
Step 4: Connect the Galaxy S3 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 5: In Odin, click the PDA button and select the CF-Auto-Root-d2att-d2uc-samsungsghi747.tar.md5 file.
Step 6: Verify that Auto Reboot and F. Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option is NOT selected.
Step 7: Double-check and click Start button in Odin. The installation process will now begin.
Step 8: Once the installation process completes, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect it from the computer.

Samsung Galaxy S3 (AT&T) SGH-I747 running on Android 4.3 Jelly Bean is now rooted successfully. Open the app drawer of the phone and check for an app called SuperSU. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Note: Many Samsung devices store a flash counter that keeps track of how many times you have flashed custom firmwares to your device. Triangle Away can be used to reset the flash counter to zero.

How to Fix "Unfortunately, SuperSU has stopped"?
Step 1: Download and install the latest APK of SuperSU on your device.
Step 2: Open SuperSU app (update the binary if prompted) and allow it to disable KNOX.
Step 3: Reboot your device.

Thank's to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.

Read also: How to Root Galaxy S3 (AT&T) SGH-I747 on Android 4.3 Jelly Bean and Install TWRP Recovery

Baca Selengkapnya ....

How to Update Galaxy Note 2 N7100 with Android 4.3 XXUENA1 Jelly Bean Official Firmware

Posted by Unknown 0 komentar

Samsung has recently released a new Android 4.3 Jelly Bean update for the international version of Galaxy Note 2 bearing model number GT-N7100. The new official firmware is now available for download in Southeast Asian countries as an Over-The-Air (OTA) update as well as through Samsung KIES.

Firmware details
PDA: N7100XXUENA1
CSC: N7100OLBEML1
MODEM: N7100XXUENA1
Version: Android 4.3
Build date: Jan 15, 2014
Regions: Indonesia, Malaysia, Philippines, Singapore, Thailand, Vietnam

Samsung Galaxy Note 2 N7100 users who missed the OTA update notification or unable to access the update over Samsung KIES, may follow our step-by-step guide to install the update manually.

Pre-requisites
1. Install USB Drivers for Samsung Galaxy Note 2 on the computer.
2. Enable USB Debugging Mode on the phone. Go to Settings >> About Phone. Tap on Build Number several times till the message shows "You are now a Developer". Then enable USB debugging by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Note 2 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The Android 4.3 XXUENA1 Jelly Bean firmware is compatible only with the Samsung Galaxy Note 2 with model number GT-N7100. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Note 2 by navigating to Settings >> About Phone.

Files Required
1. Android 4.3 XXUENA1 Jelly Bean Firmware (Mirror Link) for Galaxy Note 2 N7100
2. Odin 3.07 (Mirror Link)

Steps to Update Galaxy Note 2 N7100 with Android 4.3 XXUENA1 Jelly Bean Firmware
Step 1: Extract Firmware zip file using WinRAR/7-Zip/WinZip or any other extracting tool, you will get a .tar.md5 file and some other files (optional).
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Switch off the Galaxy Note 2.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy Note 2 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 7: Select the following files in Odin from extracted N7100XXUENA1 firmware folder:

Click the PDA button and select the .tar.md5 file.
Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
Click the PIT button and select the .pit file. Ignore if there is no such file.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Start button to begin the installation process.
Step 10: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect it from the computer.

Samsung Galaxy Note 2 N7100 should be now updated with Android 4.3 XXUENA1 Jelly Bean official firmware. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy Note 2 N7100 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Click here to know How to Root Galaxy Note 2 N7100 running on Android 4.3 Jelly Bean firmware.

Baca Selengkapnya ....

How to Update Galaxy Grand Duos I9082 with Android 4.2.2 XXUBNB2 Jelly Bean Official Firmware

Posted by Unknown 0 komentar

Samsung Galaxy Grand Duos (GT-I9082) users in India has received a new Android 4.2.2 Jelly Bean update with firmware build number I9082XXUBNB2. The new official firmware is now available as an Over-The-Air (OTA) update as well as through Samsung KIES.

Firmware details
PDA: I9082XXUBNB2
CSC: I9082ODDBNB1
MODEM: I9082DDUBNB1
Version: Android 4.2.2
Build date: Feb 06, 2014
Regions: India, Bangladesh, Nepal, Sri Lanka

Samsung Galaxy Grand Duos I9082 users who missed the OTA update notification or unable to access the update over Samsung KIES, can now download and install the same manually using our step-by-step guide.

Pre-requisites
1. Install USB Drivers for Samsung Galaxy Grand Duos on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Grand Duos should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The Android 4.2.2 XXUBNB2 Jelly Bean firmware is compatible only with the Galaxy Grand Duos (GT-I9082). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Grand Duos by navigating to Settings >> About Phone.

Files Required
1. Android 4.2.2 XXUBNB2 Jelly Bean Firmware (Mirror Link) for Galaxy Grand Duos I9082
2. Odin 3.07 (Mirror Link)

Steps to Update Galaxy Grand Duos I9082 with Android 4.2.2 XXUBNB2 Jelly Bean Firmware
Step 1: Extract Firmware zip file using WinRAR/7-Zip/WinZip or any other extracting tool, you will get a .tar.md5 file and some other files (optional).
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Switch off the Galaxy Grand Duos.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy Grand Duos to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 7: Select the following files in Odin from extracted I9082XXUBNB2 firmware folder:

Click the PDA button and select the .tar.md5 file.
Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
Click the PIT button and select the .pit file. Ignore if there is no such file.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Start button to begin the installation process.
Step 10: Once the installation process completes, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.

Samsung Galaxy Grand Duos I9082 should be now updated with Android 4.2.2 XXUBNB2 Jelly Bean official firmware. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy Grand Duos I9082 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Click here to know How to Root Galaxy Grand Duos I9082 running on Android 4.2.2 Jelly Bean firmware.

Baca Selengkapnya ....

How to Update Galaxy Star Pro S7262 with Android 4.1.2 XEUANA1 Jelly Bean Official Firmware

Posted by Unknown Selasa, 11 Februari 2014 0 komentar

Samsung Galaxy Star Pro with dual SIM card slots also known as Galaxy Star Pro DUOS (GT-S7262) has already received the latest Android 4.1.2 Jelly Bean update with firmware build number S7262XEUANA1. The new official firmware is now available as an Over-The-Air (OTA) update as well as through Samsung KIES.

Firmware details
PDA: S7262XEUANA1
CSC: S7262OXEANA1
MODEM: S7262XEUANA1
Version: Android 4.1.2
Build date: Dec 30, 2013
Regions: Russia, Kazakhstan, Ukraine, Uzbekistan

Samsung Galaxy Star Pro S7262 users who missed the OTA update notification or unable to access the update over Samsung KIES, can now download and install the same manually using our step-by-step guide.

Pre-requisites
1. Install USB Drivers for Samsung Galaxy Star Pro on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Star Pro should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The Android 4.1.2 XEUANA1 Jelly Bean firmware is compatible only with the Samsung Galaxy Star Pro (GT-S7262). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Star Pro by navigating to Settings >> About Phone.

Files Required
1. Android 4.1.2 XEUANA1 Jelly Bean Firmware (Mirror Link) for Galaxy Star Pro S7262
2. Odin 3.07 (Mirror Link)

Steps to Update Galaxy Star Pro S7262 with Android 4.1.2 XEUANA1 Jelly Bean Firmware
Step 1: Extract Firmware zip file using WinRAR/7-Zip/WinZip or any other extracting tool, you will get a .tar.md5 file and some other files (optional).
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Switch off the Galaxy Star Pro.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy Star Pro to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 7: Select the following files in Odin from extracted S7262XEUANA1 firmware folder:

Click the PDA button and select the .tar.md5 file.
Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
Click the PIT button and select the .pit file. Ignore if there is no such file.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Start button to begin the installation process.
Step 10: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.

Samsung Galaxy Star Pro S7262 should be now updated with Android 4.1.2 XEUANA1 Jelly Bean official firmware. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy Star Pro S7262 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Click here to know How to Root Galaxy Star Pro S7262 running on Android 4.1.2 Jelly Bean firmware.

Baca Selengkapnya ....

How to Update Galaxy S3 (LTE) I9305N with Android 4.3 XXUEML2 Jelly Bean Official Firmware

Posted by Unknown Senin, 10 Februari 2014 0 komentar

Samsung has released the Android 4.3 Jelly Bean update for the LTE version of Galaxy S3 with model number GT-I9305N. The new official firmware is now available as an Over-The-Air (OTA) update as well as through Samsung KIES.

Firmware details
PDA: I9305NXXUEML2
CSC: I9305NCOVENA2
MODEM: I9305NXXUEMK1
Version: Android 4.3
Build date: Dec 17, 2013
Regions: Sweden

Samsung Galaxy S3 (LTE) I9305N users who missed the OTA update notification or unable to access the update over Samsung KIES, can now download and install the same manually using our step-by-step guide.

Pre-requisites
1. Install USB Drivers for Samsung Galaxy S3 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy S3 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The Android 4.3 XXUEML2 Jelly Bean firmware is compatible only with the Samsung Galaxy S3 with model number GT-I9305N. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S3 by navigating to Settings >> About Phone.

Files Required
1. Android 4.3 XXUEML2 Jelly Bean Firmware (Mirror Link) for Galaxy S3 (LTE) I9305N
2. Odin 3.07 (Mirror Link)

Steps to Update Galaxy S3 (LTE) I9305N with Android 4.3 XXUEML2 Jelly Bean Firmware
Step 1: Extract Firmware zip file using WinRAR/7-Zip/WinZip or any other extracting tool, you will get a .tar.md5 file and some other files (optional).
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Switch off the Galaxy S3.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy S3 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 7: Select the following files in Odin from extracted I9305NXXUEML2 firmware folder:

Click the PDA button and select the .tar.md5 file.
Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
Click the PIT button and select the .pit file. Ignore if there is no such file.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Start button to begin the installation process.
Step 10: Once the installation process completes, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect it from the computer.

Samsung Galaxy S3 (LTE) I9305N should be now updated with Android 4.3 XXUEML2 Jelly Bean official firmware. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy S3 (LTE) I9305N stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Click here to know How to Root Galaxy S3 (LTE) I9305N running on Android 4.3 Jelly Bean firmware.

Baca Selengkapnya ....

How to Update Galaxy S3 (LTE) I9305 with Android 4.3 XXUENA1 Jelly Bean Official Firmware

Posted by Unknown 0 komentar

The international version of Samsung Galaxy S3 with LTE network support (GT-I9305) has received a new Android 4.3 Jelly Bean update with firmware build number I9305XXUENA1. The new official firmware is now available as an Over-The-Air (OTA) update as well as through Samsung KIES.

Firmware details
PDA: I9305XXUENA1
CSC: I9305SIOENA1
MODEM: I9305XXUENA2
Version: Android 4.3
Build date: Jan 13, 2014
Regions: Slovenia

Samsung Galaxy S3 (LTE) I9305 users who missed the OTA update notification or unable to access the update over Samsung KIES, can now download and install the same manually using our step-by-step guide.

Pre-requisites
1. Install USB Drivers for Samsung Galaxy S3 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy S3 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The Android 4.3 XXUENA1 Jelly Bean firmware is compatible only with the LTE version of Samsung Galaxy S3 (GT-I9305). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S3 by navigating to Settings >> About Phone.

Files Required
1. Android 4.3 XXUENA1 Jelly Bean Firmware (Mirror Link) for Galaxy S3 (LTE) I9305
2. Odin 3.07 (Mirror Link)

Steps to Update Galaxy S3 (LTE) I9305 with Android 4.3 XXUENA1 Jelly Bean Firmware
Step 1: Extract Firmware zip file using WinRAR/7-Zip/WinZip or any other extracting tool, you will get a .tar.md5 file and some other files (optional).
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Switch off the Galaxy S3.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy S3 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 7: Select the following files in Odin from extracted I9305XXUENA1 firmware folder:

Click the PDA button and select the .tar.md5 file.
Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
Click the PIT button and select the .pit file. Ignore if there is no such file.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Start button to begin the installation process.
Step 10: Once the installation process completes, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.

Samsung Galaxy S3 (LTE) I9305 should be now updated with official Android 4.3 XXUENA1 Jelly Bean. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy S3 (LTE) I9305 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Click here to know How to Root Galaxy S3 (LTE) I9305 running on Android 4.3 Jelly Bean firmware.

Baca Selengkapnya ....

How to Update Galaxy S4 (LTE) I9505 with Android 4.3 XXUENAA Jelly Bean Official Firmware

Posted by Unknown 0 komentar

Samsung has just released another Android 4.3 Jelly Bean update for the LTE version of Galaxy S4 (GT-I9505). The new official firmware is now available as an Over-The-Air (OTA) update as well as through Samsung KIES.

Firmware details
PDA: I9505XXUENAA
CSC: I9505YXXENA8
MODEM: I9505XXUENAA
Version: Android 4.3
Build date: Jan 27, 2014
Regions: Switzerland

Samsung Galaxy S4 (LTE) I9505 users who missed the OTA update notification or unable to access the update over Samsung KIES, may follow our step-by-step guide to install the update manually.

Pre-requisites
1. Install USB Drivers for Samsung Galaxy S4 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy S4 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The Android 4.3 XXUENAA Jelly Bean firmware is compatible only with the LTE version of Samsung Galaxy S4 (GT-I9505). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S4 by navigating to Settings >> About Phone.

Files Required
1. Android 4.3 XXUENAA Jelly Bean Firmware for Galaxy S4 (LTE) I9505
2. Odin 3.07 (Mirror Link)

Other regions: United Kingdom

Steps to Update Galaxy S4 (LTE) I9505 with Android 4.3 XXUENAA Jelly Bean Firmware
Step 1: Extract Firmware zip file using WinRAR/7-Zip/WinZip or any other extracting tool, you will get a .tar.md5 file and some other files (optional).
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Switch off the Galaxy S4.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy S4 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 7: Select the following files in Odin from extracted I9505XXUENAA firmware folder:

Click the PDA button and select the .tar.md5 file.
Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
Click the PIT button and select the .pit file. Ignore if there is no such file.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Start button to begin the installation process.
Step 10: Once the installation process completes, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.

Samsung Galaxy S4 (LTE) I9505 should be now updated with Android 4.3 XXUENAA Jelly Bean official firmware. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy S4 (LTE) I9505 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Click here to know How to Root Galaxy S4 (LTE) I9505 running on Android 4.3 Jelly Bean firmware.

Baca Selengkapnya ....